Introduction

In 2022, it has become easier and simpler to get the necessary equipment and supplies to perform a paint job right at home. Besides, a paint job at a custom repair shop is usually expensive. Like other vehicle owners, you don’t want damaged paint to ruin the entire appeal of your car.
Here is an overview of steps you need to follow to successfully paint your car at home:

Step #1 – Preparation

First, the last thing you want is to perform a paint job at home in haste. In fact, take your time and prepare for a few days to get the “right” tools and supplies for a thorough and clean paint. For instance, make sure to choose a wider and more suitable location. Your first approach should be to remove dents, trim, and rust before moving on to the paint job.

Step #2 – Sanding

Sanding is an essential step in painting your car as it gives the paint an even and smooth finish. So, make sure to sand the entire car with circular motions. From the bare metal to the original primer, make sure not to miss out on sand spots. Sanding is critical to make sure the paint sticks.

Step #3– Cleaning

Your next step is to use a shop towel, like the one provided in our kits, with wax & grease remover to wipe out the surfaces of your car as thoroughly as possible. At this stage, your goal should be to get rid of oil residue and get the car ready for the final painting. You can use newspaper and masking tape to cover car surfaces like mirrors, glass, door handles, and window trim that you don’t want to paint.

Step #4– Priming

After sanding your repair, it is time to use a primer to prime your car’s surface. It’s not rocket science – the trick is to allow your primer to cure in key areas of your car.
As long as you follow the container instructions, the primer will cure thoroughly. At this point, you will have to sand the car one more time. While sanding primed surfaces is important, make sure not to overdo the sanding that could expose the car’s repaired surfaces.

Step #5 – Painting

Once you wipe down the primed surfaces with a wax & grease remover, you can move on to paint your car. It is important to do a spray out test at this stage to ensure the amount you might have to blend.
Keep at least 12 inches of distance throughout the painting of Base Coat and let it sit for 20-60 minutes before applying clear coat. Apply 1-2 wet coats of clear, then let sit for at least 2 hours before removing the masking tape and paper. Behold the new paint job.
Final Thoughts: Get the Best Car Paint Job!
A simple solution is often the best solution and a DIY paint job at home is more common than you think. With Ready Car Paints, you don’t have to go through the trouble of getting all the equipment and supplies to paint your car at home. We can help you save your valuable time and resources through our ready Automotive Spray Paint Kits and Touch up Paint kits.
Reach out to Ready Car Paints and Bid farewell to scratches and scuffs through our custom-designed paint kits and improve your car’s appeal for years to come.